Extra threads of adjustment will help you dial in toe settings to your desired specs. Also by using the supplied spacers to return the tie rod back to its proper angle, you will eliminate this wheel jerking effect. BlackTrax bump steer kits are made with A6061 forged aluminum with an anodized coating. The Teflon-lined pillowball reduces deflection improving steering response. Front and rear kits are in stock for S2000 of all years.

Many of these components are used in race winning vehicles. Wicked's specially formulated design and bushings are what makes the difference. Don't be fooled by imitations, though they may try to look the same, their bushings and quality do not live up to genuine Wicked components. Stay tuned as we will design more S2000 suspension parts.

S2000 Suspension Designed by BlackTrax for Wicked Tuning

BlackTrax is the EXCLUSIVE distributor for Wicked S2000 products.

Recommendation: For cars lowered up to 2" start with the large spacer.

To order, please contact us at (408) 946-2900

To order, please contact us at (408) 946-2900

IMPORTANT:  Modifying any suspension component may change other part clearances and cause binding or interferences.  After installing any suspension/camber products, the suspension must be checked for binds or interference between all components, other arms and the chassis. Be sure that all control arms, struts and steering ends move freely through the full movement of the suspension (springs may need to be removed to fully check component travel). Installing any Wicked Tuning product on a modified vehicle (lowered or raised) from the original factory design requires a detailed check of all suspension components and their movements. We recommend that a trained technician install and adjust all products. Alignment Highly Recommended after installation. Off-road use only.