408 946-2900 // M-F 10-6
BlackTrax Logo
HomeProjectsServicesProductsMediaContact
  Hondata F-Pro K-Pro / S300 / S100 / Gaskets / Reflash / F-Pro
     
 
  Event Calendar RecentProjects
  Contact Us:
408-946-2900


Products Home

S2000 Bumpsteer Kit

Kraftwerks
Supercharger Kits


Hondata Products

ECS Systems

Clutch Sets

Intake Manifolds

Intake Manifold
Spacers & Adapters

Junkyard Clearance


Project Cars

Products

Videos

 

NOW TAKING PRE-ORDERS!

Hondata is pleased to announce the release of the FlashPro for the US 2006+ S2000 for $695. Available in early November the FlashPro enables NA and forced induction tuning using the factory Honda S2000 ECU.

FlashPro allows full user tuning and datalogging of 06+ S2000. It includes Windows based software called FlashProManager.

FlashPro connects from your laptop's USB port to your vehicles diagnostic port to provide 90 second programming with a variety of calibrations with extensive real time and stored datalogging capabilities.

Price: $695

LIMITED SUMMER SPECIAL: $1100 Out The Door & Dyno Tuned!

Vehicle ECU Part Number FlashPro Part Number
2006 + US S2000 PZX-A04 through PZX-A21 FP-S2K-US

Important: Make sure that you order the correct FlashPro, and that FlashPro will work with your ECU. We recommend that your check your ECU is compatible by checking your ECU part number below. Dynotuning is by appointment only.

FlashPro features

  • Programmable ECU interface.
  • Connects via OBDII diagnostic port.
  • USB 2.0 connection
  • Works with Laptop or Desktop
  • No ECU modification necessary.
  • 90 second ECU programming time.
  • 20 hours on board datalogging memory.
  • FlashProManager Windows software.
  • Check and clear diagnostic codes.
  • Customizable laptop gauges.
  • Readiness codes and smog check status.
  • Dual calibration storage - upload from one of two calibrations stored in the FlashPro

2006+ S2000 tuning features

  • Ignition, fuel, idle speed, table editing.
  • VTEC window.
  • Rev and launch limiters.
  • Map tracing  & lambda overlay.
  • Expanded fuel, ignition & cam angle tables for forced induction.
  • 4 bar MAP sensor support (40 psi).
  • Support for larger injectors.
  • Injector latency / dead time.
  • Individual cylinder fuel & ignition trim.
  • Starting calibrations for intake, headers, forced induction & larger injectors.

To order, please contact us at (408) 946-2900

 

 

 

 

 
   
 
    Copyright © 2004-2009 BlackTrax Performance. All Rights Reserved.

 
basebar

Home // Projects // Services // Products // Media // Contact